FREE USPS GROUND SHIPPING FOR ALL DOMESTIC ORDERS

Skip to product information
1 of 5

Widget Man ZSF2 -- Programmable Spark and Magneto Filter UPC 767571999255

Widget Man ZSF2 -- Programmable Spark and Magneto Filter UPC 767571999255

Regular price $37.79 USD
Regular price Sale price $37.79 USD
Sale Sold out
FREE USPS DOMESTIC SHIPPING, expedited shipping calculated at checkout

OVER 1,000 SOLD WORLDWIDE

SKU:ZSF2v02

Low stock: 5 left

CLEAN DIGITAL SIGNAL FROM ANY SPARK COIL!
The ZSF2 can “ring proof” the signal from any spark coil, providing clean 12V square waves from the spikiest magneto or longest-discharge COP coil. With selectable “blanking” times from 520 microseconds to 4.3 milliseconds, it will even clean up “multi-fire” coil signals from aftermarket CDI boxes like the MSD 6/6AL. Smaller than a half dollar and double-sealed with urethane over epoxy, it's rugged enough to live beside the engine and tiny enough to hide anywhere. Four simple wires hook it up (power, ground, coil-in and digital-out) and 3 simple DIP switches select the re-trigger interval. The switches are changeable “on the fly” to make finding the right setting for your engine a snap. Jumpy tach signals have met their match!

OPERATING FEATURES

 • WORKS WITH ALL COIL TYPES (+18V MINIMUM BREAKOVER)
 • RE-TRIGGER INTERVAL SELECTABLE FROM 0.52~4.29 MILLISECONDS
 • 5~16V SUPPLY VOLTAGE (DIGITAL OUTPUT LEVEL SAME AS SUPPLY)
 • COMPATIBLE WITH ALL POPULAR MSD AND SIMILAR IGNITION BOXES
 • COMPATIBLE WITH ALL WM RATIO CHANGER PRODUCTS

ADDITIONAL FEATURES

 • TINY 1” x 1/2” FORM FACTOR, HIDES ANYPLACE
 • CONNECTS WITH COMMON .110” FASTONS
 • INTERNALLY FUSED, POLARITY PROTECTED
 • WEATHERPROOF (IP66) IF DIPs ARE SEALED AFTER SETUP
 • TEMPERATURE RATED 225F

PACKAGE COMES WITH

 • ZSF2 PROGRAMMABLE FILTER
 • FULL INSTRUCTIONS WITH DIAGRAMS
 • 90-DAY SELLER WARRANTY, 3-YEAR AT-COST REPLACEMENT

View full details

Document Downloads

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
David W.
Fixed my 1972 Veglia tach

It was the last piece of the puzzle to get my 1972 tach to work.

D
David Wickhem
Finally a Solution!

My goal was to add a GlowShift (brand) tachometer to my 2024 Yamaha TW200 motorcycle. Simple CDI ignition to coil setup... The tachometer would not detect the CDI signal. I add the Widget Man ZSF2 and the tach immediately started working no problem... In my case the switches on the ZSF2 did not change the operation of the tach so I believe the basic filtering was the solution. Great product, treat the input output terminals carefully if you need to remove a connector you installed... Great price, and super fast shipping! A+++